2024 Dodge Dakota: Is It Coming Out With a Midsize Truck? Stellaris and Ram intend to revive the Dakota nameplate with a midsize pickup truck that is scheduled to be introduced in 2024. Because fans of the now-discontinued Dodge Dakota remain loyal to the model, which makes it a prime candidate for reintroduction, Stellantis and Ram intend to bring back the Dakota.

It is quite probable that the new Ram Dakota will be based on the Jeep Gladiator pickup, and it is possible that it may incorporate design aspects from the previous Ram 700.

It is anticipated that the next-generation Ram Dakota will be ready for purchase sometime before the end of 2023. It will be available for purchase at Ram dealerships located all around the United States, as well as in a select number of other regions.

Pickup truck aficionados tend to have a good opinion of the Dodge Dakota, which was produced until 2011 before being retired. In response to this emotion, Stellantis and Ram have decided to bring back the Dakota moniker for their next midsize pickup truck, the 2024 Ram Dakota.

2024 Dodge Dakota
2024 Dodge Dakota

The Jeep Gladiator is the most probable candidate to serve as Dakota’s platform; however, the Ram 700 may provide some inspiration for Dakota’s exterior styling. Find out when the 2024 Ram Dakota will be on sale, how much it will cost, and its many specifications based on what we know so far.

Car and Driver, a newspaper that serves the automotive industry, predicted that the new Dakota will have a base price of $26,000. This prediction was made despite the fact that information on the pricing and trim levels for the new Dakota was not yet available.

The 2024 Ram Dakota will reportedly share certain mechanical components with the Ram 1500 full-size pickup truck, but it will be built mostly on the Jeep Gladiator midsize vehicle. This information was provided by Car and Driver.

Specifications For The 2024 Ram Dakota, Including The Engine, Gearbox, Towing Capacity, And Payload Capacity

Car and Driver theorize that the 2024 Ram Dakota may share certain mechanical components with the Ram 1500 full-size pickup truck, but that it will mostly be based on another Stellantis vehicle, the Jeep Gladiator midsize truck. This is despite the fact that the Ram 1500 is a full-size pickup truck.

It is quite improbable that Ram will provide a V-8 engine option for the Dakota. On the other hand, it will almost certainly be available with the 3.6-liter V-6 engine that a good number of Stellantis models have. It’s likely that the gearbox will be automatic with eight speeds, and it’ll be paired with the engine. Ram also offers a diesel 3.0-liter V-6 engine as a potential alternative powertrain choice. This engine generates 260 horsepower and 442 pound-feet of torque.

Buyers of the Dakota will definitely be given the opportunity to choose between a four-wheel drive system or a traction-enhancing rear-wheel drive system as their preferred mode of propulsion. You may also anticipate the release of an off-road-oriented version of the Dakota, perhaps in the form of a Rebel grade.

This version will have tough styling in addition to off-road equipment such as robust all-terrain tires, underbody skid plates, and an off-road-tuned suspension.

If one were to base the capabilities of the Ram Dakota on those of the Jeep Gladiator, it would be able to tow up to 7,650 pounds and have a payload capacity of 1,600 pounds. When Ram finally unveils Dakota’s official specifications, those numbers will almost certainly be revised. However, it is likely that they will be somewhere in the neighborhood of the Gladiator’s requirements.

The 3.6-liter V-6 engine that is available in various Stellantis vehicles would most likely have to suffice for owners of the Ram Dakota, as opposed to the V-8 engines that are available in other Ram models. The pickup truck will most likely be equipped with the eight-speed automatic gearbox that Ram offers.

There is also the possibility of selecting the 3.0-liter V-6 turbodiesel engine, which generates 260 horsepower and 442 lb-ft of torque.

2024 Dodge Dakota
2024 Dodge Dakota

The introduction of a new RAM Dakota in 2024 as a body-on-frame pickup truck seems to be the most reasonable option. It is possible that the chassis will be derived from a scaled-down version of the one used by the Ram 1500, which will make it possible to install a V8 engine in the vehicle.

In addition to that, the Jeep Gladiator’s chassis may be used for this vehicle as well. There is also the possibility that the revived Dakota will be a lifestyle truck comparable to the 2022 Hyundai Santa Cruz. A pickup somewhat similar to this one is already sold by Stellantis in Central and South America.

Although it is known as the Fiat Toro in Brazil, it is more often referred to as the RAM 1000 in the other nations of Latin America. At this point in time, a gasoline V6 engine with a capacity of 3.6 liters is the most probable conclusion.

On the other hand, a 3.0-liter EcoDiesel engine with 260 horsepower and 480 pound-feet of torque may also be available. There have been several publications that speculate on the possibility of a hybrid powertrain. Last but not least, there are many whispers circulating around the high-performance Dakota SRT variant.

The new Dakota will be offered with either a rear-wheel drive or a four-wheel drive system as an optional drivetrain configuration. You may also anticipate the release of an off-road Rebel variant, which will have off-road tires, skid plates, and a suspension that has been adjusted specifically for rough terrain.

2024 Dodge Dakota Exterior
2024 Dodge Dakota Exterior

Exterior Design

The Ram 1500 pickup truck will serve as a model of reference for the future RAM Dakota in 2024. Because this is the most likely conclusion, it does not come as a shock to us. The Dakota is going to have a very unique and contemporary appearance, despite the fact that it is a more compact pickup. The Dakota and the Ram 1500 have very similar body lines, which is one reason why the design language is immediately recognizable.

Even some of the physical elements of the outside are almost exactly the same. LED headlights are included together with the traditional trapezoidal grille on the front fascia of the vehicle. In comparison to the Ram 1500, the Dakota features doors and fenders that are designed differently.

The bumpers, in addition to the wheels and exterior colors, set this vehicle apart from others. The back end is equipped with LED taillights, and to our eyes, it presents a really fashionable appearance. As was previously mentioned, the Dakota will be a pickup truck of moderate size.

It is anticipated that the external design of the Ram Dakota for the model year 2024 will be comparable in appearance to that of the Ram 700; however, the grille and front headlamps will be analogous to those found on the Ram 1500.

Additionally, it is anticipated that the inside of the Dakota will be comparable to that of the Ram 1500. However, it is quite unlikely that it will have all of the amenities that are available on the bigger car.

There is nothing more we can do except wait till the vehicle is officially unveiled or until Stellantis and Ram give us a sneak peek of the pickup in the form of teaser photographs or videos.

Car protection is something that shouldn’t be put off; most of the time, we don’t give it any thought until it’s much too late. Due to the fact that we are all so preoccupied with the activities of our daily lives, it is easy for us to neglect to safeguard our vehicles from both the weather and from other drivers who aren’t nearly as conscientious as we are.

Because your automobile is the pride and pleasure of your life, it is deserving of the best possible protection. You can protect your vehicle from the elements in a way that has never been possible before with the selection of custom-fit car covers that Coverking offers.

Coverking’s custom-fit car covers are manufactured from high-quality fabrics and cover every inch of your vehicle. These covers leave no portion of your car vulnerable to the sun or other factors that might harm your paint job or otherwise create wear and strain on your vehicle. You don’t want to find yourself in a position where you need to replace components because you didn’t take the time to safeguard them. This is the last thing you want to happen.

Our firm has been in the business of supplying customers with high-quality car coverings, floor mats, and dash covers for more than 30 years. Our products can be found in a wide variety of vehicle makes and models.

We are dedicated to providing goods that are personalized to the demands of our customers, and we put in a lot of effort to make sure that our workforce is educated in the most recent manufacturing procedures that are available.